Mar 01, 2024

How to Design SSR Heatsink for My Business

Leave a message

In today's rapidly developing electronics industry, as electronic devices have increasingly higher performance requirements, thermal management has become a key challenge in the design process. SSR radiators, especially those made of aluminum, play a vital role in ensuring the stable operation of equipment. Aluminum is not only widely used due to its excellent heat conduction efficiency, but also occupies an important position in the field of heat dissipation technology due to its lightweight, high strength, and good corrosion resistance. This article will explore how to design an efficient SSR heat sink, focusing on the application of aluminum in thermal management, and how heat sink works to optimize heat transfer efficiency and thermal performance through custom design. By combining theoretical knowledge with practical examples, Kaixin Aluminum will provide a comprehensive guide to help you design a cost-effective cooling solution that meets your performance requirements.

 

Part 1: How Does the SSR Heatsink Work?

A relay is an electrical control device typically used to pass a small current in one circuit to another wire to control a larger current in another device in another circuit. It allows low-power signals to control high-power devices or multiple circuits.

SSR Solid State Relay

The working principle of SSR heatsink is based on the principles of heat conduction, convection, and radiation. First, heat is transferred from the SSR to the heat sink via thermal conduction. SSR heat sinks usually have a large contact area with the SSR to maximize heat transfer efficiency. Once the heat is transferred to the heat sink, it is dissipated to the surrounding environment using convection currents through the heat sink's physical structure-usually consisting of a series of fins. These fins increase the surface area of ​​the radiator in contact with the air, thereby accelerating heat dissipation.

 

Part 2: How to Design Your First SSR Heat Sink?

The process of customizing an SSR heat sink begins with a critical step: requirement analysis. This phase aims to fully understand the specific requirements that the heat sink must meet, including a detailed analysis of power consumption, operating environment, and spatial constraints of the suitable heat sink. Accurate requirement analysis is the foundation for designing and producing efficient heat sinks, ensuring the final product meets specific application needs.

 

Material Selection

We recommend you use aluminum alloy to decide on your SSR heatsink because of its high thermal conductivity, lightweight, and excellent machinability. However, other materials can be used depending on your specific requirements such as budget or environmental constraints. You also can view our last blog which illustrates different aluminum types we can use to manufacture heat sinks or liquid cooling plates.

 

Aluminum Profile
Aluminum Profile

Power Consumption

To determine the wattage of the load current on your solid-state relay (SSR), you need to consider several key parameters, primarily the load current and voltage of the SSR under normal operating conditions, which will be shown in the marking on the solid state relay. Or you can also look up the technical specifications of the SSR, which can usually be found in the datasheet or product specification sheet provided by the manufacturer. The main information you need to look for includes:

 

-Maximum Current Capacity: This top load, is the maximum current load that the SSR can safely pass, usually expressed in amps (A).

On-resistance or internal thermal resistance: This represents the resistance value of the SSR in the on (closed) state, usually expressed in ohms (Ω).

And then you can calculate the heat generated by solid state relays You can use the simple formula below:

 

-Power consumption= Heat (watts) = I² x R

I is the full load current or full load current flowing through the SSR (in amps).

R is the internal resistance unit of the SSR (ohms).

This formula is based on Ohm's law and calculates the heat generated by current flowing through the air and the SSR. This heat needs to be effectively dissipated through airflow and the heat sink to keep the fan and SSR operating at a safe operating temperature.

 

Heatsink Thermal Resistance

Assessing thermal resistance requirements is a critical step in designing a cooling system to ensure that the heat sink can effectively transfer heat from the solid state relay to the surrounding environment and maintain it within a safe and reliable operating temperature range. Here are the basic steps and calculations for evaluating thermal resistance needs:

 

-Determine the maximum operating temperature

First, the maximum allowable operating temperature of the mounting surface of solid state relays needs to be determined. This is usually provided by the manufacturer and can be found in the product's technical specifications. According to our experience in thermal solutions, we recommend that The maximum temperature of the metal surface of solid state relay should not exceed 70°C (158°F). If the temperature reaches above 70°C, the SSR may fail to shut down and eventually become damaged. High temperatures can also shorten the lifespan or damage other components in the same box.

Determine the Maximum Operating Temperature of SSR Heatsink
Determine the Maximum Operating Temperature of SSR Heatsink


Determine the Ambient Temperature

-Indoor applications: The internal temperature of the indoor environment is generally relatively stable, but may be affected by the heat generated by air conditioning, heating, and indoor equipment operation. For example, the ambient temperature in offices and data centers is typically controlled by air conditioning systems, between 20°C and 25°C. Solid-state relay heatsinks need to be designed to account for this stable but relatively warm environment.

 

-Special industrial environment: In special industrial environments, such as refineries, chemical plants, or other high-temperature industrial locations, radiators must not only cope with high ambient temperatures but also consider the impact of potentially corrosive gases or liquids.

 

Temperature Rise

Calculating temperature rise (ΔT) is a critical step in determining cooling system requirements to ensure the solid state relay relays can operate at a safe temperature. This calculation helps designers evaluate how much heat the heat sink needs to remove from the solid state relay to prevent overheating. Here's a detailed explanation of how to do this calculation:

Temperature RiseATvs Working Temperature

 

-Determine the maximum operating temperature: First, you need to know the maximum safe operating temperature of the SSR, which is usually provided by the manufacturer. Assume that this temperature is (Tmax).

 

-Assess the ambient temperature: Then, assess the ambient temperature at which the junction temperature of the SSR is expected to operate (Te). This temperature depends on the application and geographical installation location, as mentioned earlier.

 

Calculate the temperature rise: Finally, use the installed SSR+ unit's maximum operating temperature minus the ambient temperature to calculate the maximum temperature rise your cooling system will need to handle the installed full load (ΔT)

And we have concluded that ΔT=Tmax - Te

The ΔT plays a crucial role in deciding heat sink size, material selection, installation, and the possible demand for fans or other cooling accessories. In addition, this calculation also helps heat sink designers consider reserving a certain safety margin to deal with sudden increases in ambient temperature or unexpected overload conditions of power supplies in the solid state relay to ensure long-term stable operation of the system.

 

Calculate Thermal Resistance Requirements

The low thermal resistance ensures that the heat sink can effectively remove heat from the SSR and maintain it operating at a safe operating temperature. The calculation formula for thermal resistance is as follows:

R th=ΔT/P

 

1, (Rth) is the required thermal resistance in °C/W (Celsius per Watt).

2, ΔT is the maximum temperature rise of the SSR, which is the maximum operating temperature of the solid state relay minus the operating temperature in (°C)

3, P represents the heat generated by the SSR, measured in W(Watts).

 

With the calculated thermal resistance requirements, the designer can evaluate whether an existing heat sink will meet the requirements or design a new heat sink to achieve the target thermal transfer amount. If the calculated thermal resistance value is too high, you may need to consider increasing the size of the heat sink or adding additional cooling measures (such as fans, heat pipes, etc.) to improve suitable heat sink dissipation efficiency.

 

Choose the Right Aluminum Heatsinks for Your Solid State Relays

Based on the final calculation you provided, you can choose the custom high quality SSR heat sink for your business. Here are some crucial data for deciding customization of various cooling methods

When deciding to use an active or passive cooling system, it is critical to consider the SSR's thermal resistance (Rth​), operating temperature (T), and power produced (P).

SSR Heatsink
Kaixin SSR Heatsink

 

1. High power & high temperature & low thermal resistance requirements

Situation: The solid state relay generates high power (>100W), has a high operating temperature range (>85°C), and requires low thermal resistance (<1°C/W).

Recommended cooling solution: active air cooling. In this case, it is difficult to effectively remove heat from the SSR by relying solely on passive cooling. Fan cooling or liquid cooling systems are recommended for high cooling needs.

 

2. Medium power & medium temperature & medium thermal resistance requirements

Scenario: The solid state relay device generates moderate power (10W to 100W), has a moderate operating temperature range (60°C to 85°C), and requires a moderate thermal resistance (1°C/W to 5°C/W).

Recommended cooling solution: passive cooling or mild active cooling. In this case, a high-efficiency heat sink may be sufficient, but adding a small fan can provide additional cooling benefits in some cases, especially in environments with restricted air movement.

 

3. Low power & low temperature & high thermal resistance tolerance

Scenario: solid state relay generates low power (<10W), has a low operating temperature range (<60°C), and can tolerate high thermal resistance (>5°C/W).

Recommended cooling solution: passive cooling. In this case, installing a simple heat sink is usually enough to keep the SSR within a safe operating temperature, without the need for additional fans or liquid cooling systems installed.

 

Detailed Design of Solid State Relay Heatsink

After you determined the thermal solution of choosing solid state relay heatsink together with other accessories. You should balance the cooling needs with the limitations of the installation space when designing the size and shape of the solid state relay heat sink.

 

-Fin Thickness

The thickness of the fins in a heat sink especially extruded SSR heatsink is a complex consideration that is influenced by many factors. The first is the thermal conductivity of metal in the material. There is no doubt that copper can provide better heat dissipation performance than aluminum, but the cost is 2 times more expensive than aluminum. The advantage of aluminum alloy is its low cost, even if thicker, steel fins are needed to achieve the suitable heat sink dissipation performance of copper alloy

But another point you need to consider is that solid state relay heat sinks are products with long service life, especially for some large machines in the factory, which means thick fins can provide better mechanical strength.

Comparison with different material of heatsink
Comparison with different material of heatsink


-Fin Spacing

The spacing between fins, also known as fin gaps, is a key factor in determining the heat transfer efficiency of a radiator. Maintaining proper spacing is critical to ensuring adequate air circulation, whether through natural or forced convection, which is essential for effective heat dissipation.

If the distance between the fins is too close, it will affect the air circulation; on the contrary, note, that if the distance between the fins is too large, the heat dissipation efficiency will not be good and the space will inevitably increase. You can contact the Kaixin Aluminum engineer to give you some technical advice based on the fundamental calculation of dimensions and requirements.

 

-Fin Shape

Fin shapes can generally fall into one category: plate fins and pin fins. Plate fins are thin, parallel structures extending from the base of the fin to provide some protection and a large area for heat transfer. Fittingly, a needle tube blade is a condensed or elongated object that extends from the base and is designed to improve protection and air circulation.

 

In highly directional tip environments with forced convection, plate fins often perform better with larger guides removed and a more streamlined shape. This shape helps guide air flow across the fin surface more effectively, improving heat transfer efficiency. However, in the case of multidirectional airflow, pin fins exhibit superior performance because they are better able to adapt to changes in the direction of the fluid flow.

Plate Fins and Pin Fins Heatsinks
Pin Fins and Plate Fins Heatsinks

 

It is particularly worth noting that in the expected environment, such as a sky-filled factory scene, pin fins have advantages over plate fins. Because of their more elongated shape, pin fins are easily captured or clogged and are easier to clean. This makes pin fins a more reliable and practical choice in environments that require long-term stable operation, especially when regular maintenance or cleaning is required.

 

-Fin Height

Fin height is indeed an important factor affecting the heat transfer efficiency of the radiator. There are potential advantages to increasing the height of the fins. Increasing the height of the fins provides more surface area, thereby enhancing heat exchange with the surrounding medium (usually air). This helps improve heat transfer efficiency, especially if heat is dissipated by natural convection. At the same time, sufficient fin height ensures structural stability under the influence of fluid flow and temperature changes.

CFD for Heatsink
CFD for Heatsink

 

However, too high a height also has some disadvantages, the most critical of which is limited space. Therefore, you need to consider the fin height and the above factors to obtain maximum heat dissipation efficiency.

When you have gained most of the data for your custom SSR heat sink, then you can use CFD simulation to analyze whether the heatsink is at a suitable installation. Click to learn more about CFD simulation to customize your thermal solution.

 

Part 3: Some Tips That Further Improve Solid State Relay Heatsink

If you want to further improve your heat sink performance even though it has gained a great effort in dissipating heat. Kaixin Aluminum suggests adding some accessories to a suitable heat sink to make this happen.

 

-Customize Heatsink with Surface Treatment

Apart from manufacturing solid state relay heatsinks, Kaixin Aluminum is pleased to provide various surface treatments for your custom heatsink if you need them, including anodizing, powder coating, sandblasting, electroplating, etc. Click here to learn more details about surface treatments.

Kaixin Surface Treatments
Kaixin Surface Treatments

-Thermal grease:

Applying thermal grease (also known as thermal paste) between the solid state relay unit and the heat sink unit can help increase thermal conductivity between the two mounted surfaces. This reduces the thermal resistance at the interface, allowing for more efficient heat transfer.

 

-Thermal pad:

Thermal pads are another option for improving heat transfer between the SSR and the heat sink. Made of thermally conductive material, these pads adapt to surface irregularities, filling air gaps and enhancing thermal contact. They are easy to install and can be a good alternative to thermal paste in some applications.

Heatsink with Thermal Pad
Heatsink with Thermal Pad


-Proper installation pressure:

It is critical to ensure that there is sufficient even pressure when the solid state relay is mounted to the heat sink. Proper mounting pressure helps maximize the contact area between the mounted solid state relay and the heat sink by using more mounting screws, promoting efficient heat transfer. However, avoid excessive pressure to prevent damage to the SSR.

Send Inquiry