Although the function of the different electronic heat sink is to absorb the heat generated by various chips inside the electronic integrated circuit and then spread to the chassis or outside, there are some differences in the application object. Only when the temperature of electronic equipment is in a normal state can it run normally for a long time. If the heat dissipation is not good, it will cause failure or even damage to important components of electronic equipment. Most radiators absorb heat through contact with the surface of heating parts, and then transfer the heat through various methods, such as the air inside the chassis, then transfers the hot air to the outside of the chassis to complete the cooling of the computer.
Electronic radiator comes in many varieties, be like: CPU, motherboard chipset, hard disk, case, power source and even optical drive need radiator, these different radiators cannot mix use, and among them, the most common is the CPU. According to the way of taking heat away from the radiator, the radiator of the annealing furnace can be divided into active heat dissipation and passive heat dissipation. The former is a common air-cooled radiator, while the latter is a common heat sink. Further subdivide heat dissipation mode, it can be divided into air cooling, heat pipe, liquid cooling, semiconductor refrigeration, compressor refrigeration and so on
What does a computer radiator do?
Computer radiators are used to dissipate heat from the hardware When the hardware (CPU, north and south bridge chip, graphics, etc.) at work, produce a lot of heat. It’s the radiator that dissipates the heat that keeps the hardware working. Without the CPU radiator, in the heat generated by the boot moment is enough to make it burn out.