Metal stamping parts can be seen everywhere in our life,.but in the metal stamping parts processing, the size of the metal stamping parts may be defective. What cause the defect?
Reasons for the poor dimensions of metal stamping parts:
1. Poor mold design or processing and assembly leads to poor size, which usually occurs in the first production.
2. The height adjustment position of the mold is not in accordance with that of the mold when setting up the mold. The mold cannot be in place during the metal stamping, resulting in the size difference.
3. When positioning, it is not placed in an accurate position, and the size of the mold will be bad due to the increase of the gap of the mold caused by the duplication.
4. The mold positioning is loose, and the metal stamping parts are out of position during the positioning, which leads to the dimensional defects during the metal stamping.
The above four points are the reasons for the poor dimensions of the metal stamping parts. In order to avoid the repeated occurrence of such a situation, it is suggested that pay attention in the operation process.
Related products: Precision Metal Stamping Parts, OEM Stamping Parts, Electrical Metal Stamping Parts
KAIXIN always insist high quality, we strictly check every link of production. All our workers are well-trained.
Truly hope to cooperate with you and welcome your inquiries at any time.