PCM - Phase Change Material is a Material that changes its state with temperature and provides latent heat. The process of changing physical properties is called a phase change process, in which a large amount of latent heat is absorbed or released by the phase change material. Once this material is widely used in human life, it will become the best carrier of energy conservation and environmental protection. It has been listed as a national research and development and utilization sequence in China.
Mechanism and characteristics of heat storage
The phase change material has the ability to change its physical state within a certain temperature range. In the case of solid-phase conversion, when heated to the melting temperature, there is phase change from the solid to the liquid. During the process of melting, the phase change material absorbs and stores a large amount of latent heat. When the phase change material is cooled, the stored heat is emitted into the environment in a certain temperature range, and the reverse phase transition from the liquid to the solid is carried out. In these two phases, the energy stored or released is called the latent heat of phase change. When the physical state changes, the temperature of the material itself is almost unchanged before the phase transition, forming a wide temperature platform, although the temperature is constant, but the latent heat of absorption or release is quite large.
Application of phase change materials
Phase change materials are widely used in radiators because it characteristics of store and release large energy. Injecting the phase change materials into the radiator, so that the radiator can absorb a lot of heat when the installed equipment is running, thus effectively reducing the temperature.

Kaixin Aluminum can produce a variety of phase change heat sink. If you want to know more about it, welcome to contact us.
