architectural aluminium

architectural aluminium

Villa rone aluminum extrusion profile Product description: We can produce various kinds of aluminum extrusion profile according to your specific designs. This Villa rone aluminum extrusion profile use AA6063 material, strong and high quality. Specification: A. Gutter: 1. The expansion screw of...

Product Details

Architectural Aluminum

Product description:


We can produce various kinds of architectural aluminum extrusion profile according to your specific designs. This Villa rone architectural aluminum extrusion profile use AA6063 material, strong and high quality.


Specification:


A. Gutter:


1. The expansion screw of fixed eaves groove should not be less than 40mm in the depth of the cement eaves.


2. Every 0.6m eaves shall be fixed by a lifting piece, while the yin-yang Angle, vertical pipe and end head are fixed.


3. It is not less than 30mm.


B. Riser:


1. The waist line should be made of integral shape elbow to ensure no leakage;


2. The expansion screw of the fixed vertical pipe card shall not be less than 60mm in depth to the cement layer;


3. The pipe should be as close to the elbow as possible to effectively fix the elbow and the riser;


4. The spacing of the riser card is not greater than 2m.


5. The pipe should be as close to the elbow as possible to effectively fix the elbow and the riser;


Iii. Riveting:


6. It is necessary to fix the connection of eaves groove, gutter sealing plate and eaves trench and water pipe.


7. Try to avoid the front side of the riveting joint.


Iv. Seal:


8. Glue seal must be used for the connection of eaves groove, gutter sealing plate and eaves trench and water pipe connection.


9. The thickness of the glue is not less than 2mm and the width is 1cm on both sides of the seam. The pull rivet must be covered with glue.


Test experiment of color aluminum falling water:


Impact test


A steel ball with a diameter of 15mm from a height of 500mm is 500g.


No peeling of coating.


Bending tests


A 180 degree bending test was performed at room temperature with a manual press.


No peeling coating, no crack in the substrate.


Salt resistance experiment


Cut the cross cut with a cutting knife until it hits the aluminum plate. At 35 degrees, 5% of the salt solution is sprayed for 500 hours.


Corrosion of rust from the incision is no more than 2mm.


Acid resistance experiment


10% HCL, CHCOOH, H2SO4 experiment 100 hours.


No change on the surface


Greenhouse experiments


It can be used normally at minus 40 degrees and 50 degrees in high temperature.


Stable performance and consistent color.

image.png

image.png

image.png










Hot Tags: architectural aluminium, China, manufacturers, suppliers, factory, price

Inquiry

Related Products