We all know that the metal stamping parts will have some burrs after processing, which is easy to hurt our hands, so we need to remove the burrs on the metal stamping parts, then what are the methods of removing burrs? There are generally two ways.
Mechanical remove
1. Outer diameter: lead angle with lathe in the metal stamping processing process.
2. Edge: use file, oil stone, sandpaper, grindstone.
3. Welding slag: use vibration welding slag removal tool remove the brittle burr.
4. Holes: use the rose reamer or drill tip with larger diameter to remove burrs on the holes of the hardware stamping parts.
Manually remove
1. Electrochemical deburring: if the equipment is homemade, the cost is not high, economical, efficient.
2. Heat treatment parts can be deburring through shot blasting, but also can eliminate the surface stress.
3. Use a blowgun with a variety of shaped tips to remove burrs. Good effect, high efficiency.
4. vibration grinding to remove burr (gear burr).
The above is about removing the burr on the hardware stamping parts. We should choose the method according to the product when removing the burr. Different methods for different products.
Related products: plate Stamping Parts
KAIXIN always insist high quality, we strictly check every link of production. All our workers are well-trained.
Truly hope to cooperate with you and welcome your inquiries at any time.